Control Arm

Control Arm

The suspension parts are attached to the chassis of the vehicle with a control arm which is a bar with a hinge on each end of it. When the rear and front suspensions have coil springs used in them, then there are about four control arms which are positioned in between the brake torque, the frame which bears the carry driving and the housing of the rear axle. The up and down movement of the wheel assembly and the axle are provided by the coil springs in the rear which are supported by the frame members on which the lower control arms rotate. The control arms which have two inboard rotators or pivots are the A-arms which give strength to the structure. However, there are designs in the front end which do not use A-arms, but use control arms so that they can add adjustability and cut back on the weight instead.


Control arms are another of the parts that are products of the DAH LIN JIN CO. LTD. Company of Taiwan. As with all their other parts these are also made compatible for use on several vehicles which are manufactured globally in several different countries. This makes DAH LIN JIN CO. LTD. one of the leading product houses in the world with a turnover which is larger than most other automobile part companies. The quality control of these products and the safety factors are a big plus point of these products and keep them on the top rung of the market, in high demand and popular.

DAH LIN JIN CO. LTD.

No. 93, Rueicheng 1st St.
Dali City,
Taichung,
41272, Taiwan

Tel : 886-4-24960568
Fax : 886-4-24960568